|
Easy to build, fun to fly - Great for small fields 4 sizes and 6 colors to choose from   From Left to Right: 13mm in Green, 18mm in Neon Yellow, 24mm Red, 24mm Long in Hot Pink  A 24mm Hourglass rocket on a D11-P
NOTE: This design occasionally
displays anomalous flight characteristics at the
end of the boost phase. The rocket may
tumble rapidly while still under power but
continues in an upward direction. This is
more likely to happen under very windy
conditions. It is not dangerous and does not
affect the safety of the flight or its
recovery. This a feature and not a bug.
24mm Long Hourglass
3.75"(9.5cm) long, 3.75" (9.5cm)
diameter, 0.8 oz (21gm). Made for long (3.75")
24mm motors. Uses a 3/16" launch rod.
Recommended motors: E9-P, Ellis Mountain E10-6,
Aerotech F21W.
24mm Hourglass2.75" (7cm) long, 3.0" (7.6cm) diameter,
0.5 oz (12 gm) weight. Made for standard length
(2.75") 24mm motors. Uses as 1/8" launch rod.
Recommended motors: C11-0, D11-P, D12-0, Aerotech
E15-4W, E30-4T, RMS 24/40 reloads.
2.75" (7cm) long, 3.0" (7.6cm) diameter, 0.5 oz (12 gm) weight. Uses as 1/8" launch rod. Recommended motors: B6-0, C6-0, Aerotech D21-4T , RMS 18/20 reloads 2.5" (6.4cm), diameter, 2.5" (6.4cm)
height, 0.4 oz (9gm) weight. Uses as 1/8"
launch rod. Recommended motor: A10-PT
All these kits include stainless steel
engine hooks for positive motor retention and
quick launch preparation. They ascend rapidly on
a column of smoke. They descend slowly, tumbling end
over end, and land softly. There is no
complicated recovery system to fail. These kits are
easy to build using scissors, a craft knife and white
glue. With their high visibility and dramatic ascent
and recovery, they are real crowd pleasers.
|
Copying, cloning and any other reproduction is strictly prohibited without permission from
Art Applewhite Rockets Copyright � 2012