Ultra Delta Flying Saucer Kits

Ultra Delta Version 2.0 Flying Saucer Kits
Build them for either 18mm or 24mm motors - 6 Colors to choice from

From left to right, top to bottom
Hot Pink, Fluorescent Red, Fluurescent Orange
Neon Yellow, Fluorescent Green
White
Video file of a 3 way drag race between Ultra Deltas (Thanks to Bob Cox)

Bob's Comments: After an initial delay, all three lit nearly simulatenously. The 18mm on the C6-3 was fastest off the pad, but was quickly passed by the 24mm D12-3. With it's long burn, the 24mm E9-4 just kept going and easily outdistanced all the others. The E9-4 was corkscrewing during boost. This was it's maiden flight so I don't know if it always does that. The corkscrewing makes an Interesting sound, though. The D12-3 tumbled to its landing. The C6-3 and E9-4 both gently aero-shelled down.

Ultra Delta V2.0 Kit - $6.00 each
Select color from drop down list

EMRR Review
Specifications: Diameter – 6 inches (15cm) - Height – 2.75 inches (7cm) - Weight – 0.5 oz (12gm)
Recommended motors:
18mm version - A8-3, B4-2, B6-0, B6-2, C6-0, C6-3 and Aerotech RMS 18/20 reloads.
24mm Version - C11-0, C11-3, D11-P, D12-0, D12-3, E9-P, E9-4, Aerotech F21W and RMS 24/40 relaods

This rocket is constructed from high strength cardstock in painfully bright colors. The kit can be assembled in less than an hour using scissors, a craft knife, white glue. You decide which size to build to take advantage of an extremely wide selection of readily available motors.

Download free 13mm version of the Delta Flying Saucer

This rocket climbs fast. At apogee it flips over and glides down slowly and safely using aerobrake recovery. No complicated recovery system to fail. It's perfect for small fields and windy days, it always lands close to the pad. This kit is intended for the rocketeer looking for something out of the ordinary and easy to build and fly. With it's high visibility, dramatic liftoff and gentle recovery, it's a real crowd pleaser. Custom colors are available upon request.